- Ball Catcher
- Jane & David & Eric & Niki – bungees are installed in the aluminum
- handle needs to cut. (need dimensions)
- pipe stuff needs to tranferred from wood prototype
2. Software
- Gillian & Jiwon – set up strategy system hooked up with camera
- set up logic in the program haven’t implemented action
- Gillian & Jiwon – working on centering the potentiometer
- Colin – sonar sensor needs to get wired (want to hook up w/ robo rio)
3. Tank Drive Testing
- hasn’t progressed much from last night
- Patrick – will do ROUGH ROAD damage repair
- need to think of good practice place w/ carpet and not much stuff to bump into
4. Chassis
- Zenia & team – bumper brackets! L-stock cut and working on bolting together (should be finished today)
- Wendy & Rachel & Jane – roll bars cut, need bending & welding; pillars are cut; measurements
- Rachel & Eric – breadbox snip-outs; DONE ready for welding
- Still needs location for dozer pivot
- needs to be welded together
- axel beams need to attached!!! (NEED HELPERS)
5. Catapult
- Ed & Jovin – still trying to find a good way to get leverage for firing
- surgical tubing seemed to work last night
- we had to change bottom frame for base; need new way to attach it (suggestion: eye-bolts?)
6. Fly Wheel
- David & Aden & Liam & Will & Patrick & Niki – attached gear to the axel
- using steel pipe instead of copper
7. End Game / Winch
- Freddie – Needs a window motor (may want to do gear/window motor hybrid)
- Assembled w/o motor !!!
- Need 3/8 shaft adapter & motor mounting plates (NEED HELP)
- Software should figure out motor controllers
8. Field Elements
- Chinning bar on Climbing Wall
- Climbing Wall needs to be screwed
- Port Cullis strings need to be fixed (poly carb)
8. External Affairs
- Need to write Dean’s List essays
- need more material to write about them
- Need to write Chairman’s essays