Team Field Elements
- Port de Cullis: Nearly done. Figured out how to counter weight. Need to get a counterweight mass of appropriate size. Will be done today.
- Low Bar: Needs supports on the ramp. Will be done today
- Painting: Everything built is done. Castle wall is done. Waiting on Port Cullis.
Team Prototyping
Design A – Catapult
- Let’s try w/ quadrupled surgical hose instead.
- Need to mount it steel bar rack.
Design B – Fly Wheel
- Will test today. Done otherwise. Needs to be smaller.
Design C – Picker-Upper box
- Sprinkler hose tubing into 2 in. pieces. Worked a lot better
- Secured the center w/ zip ties
- Ball goes back into center even from the side
- Added handles.
- Need make side bumpers.
Team Chassis
- Full scale cardboard model of the center cross member. Continue to work
- Axles in the gear box need to be cut, tapped, and drilled (half are drilled. none are tapped. will try to finish today)
- Cutting steering knuckles. Need to be drilled. Will continue to drill.
- Need to make roll bar. Use welding (SUNDAY 12~1 Jason, Jane, Kate, and Ed)
——————————————————————————————
Team Field Elements
- Low Bar: DONE
- Port de Cullis: Donald?
- Painting: Working on drawbridge, everything built is done except on drawbridge
Team Prototyping
Design A
- Added springs instead of surgical hose
- Will test later today
Design B – Fly Wheel
- found all the parts. Should be operational. Wrote some code
- Will test later today!
Design C – Picker-Upper box
- changed EMT to sprinkler hose
- need trim and secure the center.
- Will keep on testing. Getting ball back up to the center
Team Chassis
- Full scale cardboard model of the center cross member. Will finish today.
Team Clean Up
- Room is basically clean except for backwall (we will do next week?)
- Table is COMPLETELY clean. Goals.